Search results

View larger image

Hinged lid keeps rainwater and other contaminants out of drum, can be padlocked to prevent unauthorized access. 10" diameter.

View Full Description

View larger image

Try this inexpensive and easy-to-use product for locking your pumps in the closed position. Strap-Lock slips over the pump and is padlocked in place (lock not included).

PLK1000 shown with lock and seal

Inexpensive and foolproof security for your valuable materials

View Full Description

No, it's not laundry day. Our rings go around your drums, and getting the Right one is very important.

Drum ring selection is often a compromise between cost and ease of use, but sometimes your product demands a certain type of drum ring.

View larger image

The ring is the heart of your open-head drum. BASCO rings match the quality standards of the original equipment rings. Choice of four styles: Plain Lug Bolt Rings offer dependability and economy on drums for non-UN/DOT regulated products. Formed tubular steel lugs are spot welded to the ring ends. Accept 5/16" or 3/8" diameter bolts and nuts. UN/DOT Bolt Rings are used on hazardous materials drums and meet all applicable regulations. Super heavy 12 gauge steel with forged threaded lugs are welded to the ring ends. Accept 5/8" diameter bolt and jam nut. Lever-Lock Rings are perfect for steel drums that are frequently opened and closed. Easy to install and remove without tools. Precision hardware for reliable operation. Long inside lever handle can be sealed with wire tie or other seals. Lever-Latch Rings are perfect for fiber and plastic drums that are accessed frequently. Light and easy to install, the convenient outside latching handle may be sealed with a wide variety of seals.

Shown 16-55BP

• OEM-quality prime steel
• Super durable baked powder-coat paint system
• Standard and custom sizes

View Full Description

View larger image

Easy-to-use one-piece seal is 100% Delrin®, won't rust or corrode. Strong shank fits through 1/8" diameter hole, collar and fully enclosed body prevent tampering. Custom decoration, sequential numbering and other colors available. Call Customer Service at 1.800.776.3786 for details.

View Full Description

View larger image

Simple and economical seal is easy to use. Just place the metal seal over the spiral-wound wire and squeeze with fingers until the seal click-locks shut. Standard white color. Order sealing wires separately below. Custom decoration, sequential numbering, and special colors are also available. Longer length sealing wires are also avialable. Call customer service at 1.800.776.3786 for details.

Note: Standard package size is 1,000 units.

Shown with SEL1 with 14SP6

View Full Description

View larger image

Simple, Safe, and Secure. Easy to install drum plug locking devices prevent access to material contained in your drums. Simply slide the two halves of the locking device around the bung flange, slip the joining bar through the halves and insert a No. 3 Master Lock® padlock through the end hole of the bar. The locking devices are sold in sets for plastic drums (fits both Greif and Mauser plastic drums with raised bung flanges) or steel drums with steel round-head plugs. PL2020 includes two 2" devices. PL2075 includes one 2" and one 3/4" device.

Note: Padlocks are sold separately and required for each locking device.

Your product is valuable to you--protect it! Keep your product in and the bad guys out.

• Provides security on location or while in transport
• Prevents access to drum plugs
• Diecast zinc construction
• Requires Master Lock® No. 3 padlock (sold separately)

View Full Description