Accessories

View larger image

• Order hose length needed for your application
• Choose the two end couplings you require
• All hose are made by GOODYEAR
• All hose 2" diameter, special size or material available on request
• Hose and coupling sold seperately

     BASCO's line of GOODYEAR hose allows you to dispense out of your tank with ease. We carry chemical (CHEMHOSE), food (FOODHOSE) and petroleum (PETROHOSE) hose that will fit your IBC or tanks.

Hose: Choose length and hose type

Coupling Sold Seperately: Choose two coupling ends to fit your IBC or tank.

Shown: CHEMHOSE with SSC200 & SSE200

View larger image

Make short work of IBC valve replacement

• Fit popular IBC valves
• Accepts 1/2" square drive extension

Don’t fight the job with ordinary wrenches - this unique steel wrench gets into the tight space around most IBC valves. Snugs up the valve collar after hand tightening the valve into the IBC. ½” drive extension acts as a wrench handle to turn the collar.

View larger image

• Only fits Mauser 6" IBC Cap

View larger image

• Use with 1/2" drive torque wrench to maintain DOT requirements
• Fits all 6" to 9" fill port caps on Composite IBC's

Adjust the stainless steel pins to fit the fill port cap by moving them in or out along the slots on the aluminum bar and maintain the adjustment by tightening the zinc plated steel wing nuts.

Be sure to follow the manufacturer's closing instructions to be in compliance with the container torque requirements.

View larger image

Versatile tool eases common IBC jobs

• Fits popular IBC fill port caps *
• Also opens most 2" and 3/4" steel drum plugs 
• All welded steel construction for durability

Don’t struggle with awkward cap tightening methods. Combination wrench tightens and loosens IBC caps and the vertical cap grabber ends double as wrenches for 2” and ¾” steel drum plugs. Use with a ¾” socket (not included) and manual torque wrench to comply with DOT closing requirements for the IBC fill port cap.

Be sure to follow the manufacturer’s closing instructions to be in compliance with the container's torque requirements. Exceeding the required torque is considered misuse and could damage the fill port cap, negate the UN rating of the container and damage the 3/4" male drive (bolt head) on the tool. The wrench manufacturer will not be responsible for any damage due to misuse.

View larger image

Precision molded black/blue polyethylene screw caps replace original equipment on plastic IBC's.

Black Standard Cap has plain top without fitting.

Black Plug-Type Cap has 2" NPS opening in center with solid polyethylene plug.

Black Plug-Type Vent Cap has 2" vent plug with PTFE membrane. Provides both pressure and vacuum relief.

Blue Plug-Type has two 2" NPT polyethylene plugs.

Tamper Evident Plug fits a 2" Buttress opening.

Socket Wrench Head makes proper cap installation easy. Fits 1/2" square drive of any ratchet or torque wrench. Welded carbon steel construction with enamel finish.

View larger image

We have the right lid for your stainless steel IBC. Highest quality 304 stainless steel with 2B finish. Fits IBC's with drum-type openings.

Flat Lid is plain with no fitting.

Nipple Cover supplied with 3" Girard nipple to accept fusible vent cap.

Poly Vent Cover supplied with 2" poly vent closure installed.

Shown SS2RVL

View larger image

• Cover your IBC to keep them dust and particle free
• Available for 275 or 330 gallon IBC
• Sold in roll quantities

View larger image

• Reduce the number of bottle replacements
• IBCs no longer will need to be triple-rinsed or cleaned to meet EPA rules
• Double barrier creates a more durable package
• Provides a contaminant-free virgin skin with each use
• Composite liner fits Schutz®, Greif®, Varicon and Mauser® systems

The IBC liner can reduce the cost of cleaning your IBC and allows you to replace the liner instead of replacing the bottle in composite IBCs. The IBC liner for stainless and carbon steel IBCs helps you reuse your container over and over with minimal cleaning.

View larger image

• Made of high density polyethylene
• Keeps dust and foreign objects out of valve assemblies 
• Available with NPT or buttress threads

Ball valve dust caps keeps dust and foreign objects out of valve assemblies during transportation or storage.

View larger image

High quality precision castings offer smooth cam-lock operation.

Adapter has 2" NPT male thread and male quick disconnect.

Dust Cover has two sealing loops that can be locked or sealed to prevent unauthorized access. Supplied with Buna-N gasket.

View larger image

Protect your IBC from dangerous overpressure conditions. Meets UN standards for venting. 316 Stainless Steel. 3" fusible cap melts at fire temperatures, provides 8.295 square inches of venting area. Hydrostatically tested to 75 psig. Supplied with PTFE gasket. Safety Cable is included and retains plug during filling and draining operations. 14 1/2" cable for convenient attachment to the container.

psig = pounds per square inch gauge

View larger image

Precision investment cast valves have reduced port design with solid ball and blowout-proof stem. PTFE seats and seals. 1000 psi WOG. Extra long low-profile plastic covered handle. Handle can also be locked and sealed against unauthorized access.

WOG = Water, Oil and Gas

Shown VSSBV2

View larger image

Fusible closure melts in event of fire, releasing dangerous pressure build up inside the container. Pre-assembled unit crimps onto opening in cover, includes a 2" plug with a 3/4" reducer opening and a metal crimp ring for secure installation. A molded, pre-scored diaphragm forms a hermetic, tamper-evident seal. Diaphragm has convenient pull ring for easy removal.

Crimping Tool easily and accurately installs closure.

View larger image