Pumps

View larger image

Let the natural force of gravity do the work

• Require no electricity or air source
• Include hose, adapter and nozzle
• 120°F max. temperature, 1,000 cps max. viscosity
• Kits with polypropylene nozzles are ideal for use with DEF

     Drum Kits include 8' of wire reinforce braided PVC hose with stainless steel permanent clamps, 1" O.D. aluminum or polypropylene nozzle with Viton o-ring and 2" male NPT adapter.

Drum Kits must be installed on drums in the vertical position. Drums must then be stored horizontally at an elevation that is high enough to justify dispensing from the 8' hose and nozzle.

Drum Kits are designed to screw into the 2" NPS bung opening on 15, 30 or 55 gallon drums.

IBC Kits include 8' of wire reinforced braided PVC hose with stainless steel permanent clamps, 1" O.D. aluminum or polypropylene nozzle with Viton o-ring and hanger clip. The appropriate 2" female NPT or 2" female Buttress (60 x 6 threads) or 2" Camlok adapter is also provided. Note: Camlock valves should use Camlock IBC kits. 2" female NPT and 2" Buttress adapters are for use with fully threaded IBC valves, not with the 2" dust cap threads typically found on the end of a 2" Camlock.

Optional Extension Hose fits all kits and uses a quick cam setup to instantly attach an additional 8' length of hose.

View larger image

Economical, and built to stay that way

• Ideal for non-corrosive liquids
• Optional metering collar for repeatable dispensing

Steel drum pump is heavily nickel-chrome plated to prevent rust. Polyethylene piston and suction tube. Includes a 2” bung adapter.

Optional Adjustable Metering Collar slips over handle to permit repeatable strokes from 2 to 8 ounces.

View larger image

Never worry about having the right pump for your product

• Stainless steel and PTFE for mild corrosives
• Delivers 26 ounces per stroke
• Pumps up to 1,000 cPs

Economical wide-spectrum hand pump transfers acids, alkalis, non-flammable solvents, detergents, oils, almost anything compatible with stainless steel and PTFE. Includes plastic 2" NPT  bung adapter. 1 1/2" O.D. x 41" H.

View larger image

High output pump is UL-Listed for flammables

• For petroleum-based liquids
• Up to 20 gallons per 100 strokes 

Each pump has a durable die cast aluminum housing, stainless steel liner and piston shaft. Easy grip, lockable handle, 22" - 40" steel telescoping suction tube that fits 15 - 55 gallon drums, vacuum breaker, 2" NPT bung adapter, 1" inlet and 3/4" female threaded outlet.

Model AT150 includes a no-drip spout.

Models BR150 and BR150M includes a 3/4" x 8' Buna hose with an imbedded static wire and an aluminum nozzle.

Model BR150M also includes a flowmeter that registers up to 100 gallons per delivery in 1/10 gallon increments, totalizes to 100,000 gallons.

View larger image

Why wrestle with a heavy pail to drain it?

Highly polished carbon steel body with polyethylene piston and packing, neoprene head gasket. Choice of two styles: with FLEXSPOUT^® adapter or with set of four screw cap adapters (1 3/4", 2 1/8", 2 1/4" and 2 7/8").

Adjustable Metering Collar (MC842) slips over handle and is secured with a set screw to permit repeatable strokes from 2 ounces to 4 ounces.

Shown P5S

View larger image

Total solution for economical transfer of flammable liquids

• Complete with bonding and grounding wires
• Choice of carbon steel or stainless steel
• FM Approved

Reliable hand pump is ideal for dispensing small amounts of liquid. Delivers 4 ounces per stroke. Bonding and grounding wires have heavy-duty alligator clips. Supplied with four screw cap adapters (1 3/4", 2 1/8", 2 1/4" and 2 7/8") or FLEXSPOUT® adapter.

Carbon Steel Pump has highly polished carbon steel with PTFE piston, packing and gasket for exceptional solvent resistance.

Stainless Steel Pump has 316 stainless steel metal parts, PTFE piston, packing and gasket.

Replacement Kit includes pre-assembled handle/piston, threaded head and all internal parts.

Optional Adjustable Metering Collar slips over handle to permit repeatable strokes from 2 ounces to 4 ounces.

Shown P5TST-S

View larger image

Strength of steel -- and economy -- in one pump

Ideal for lighter, non-water base, non-corrosive fluids, such as oil and non-flammable solvents. Solid steel construction with brass piston rings. Curved discharge spout can be removed and replaced with 3/4" garden hose.

Optional Hose Assemblies are made of clear vinyl with a 1/2" inside diameter and include a 3/4" garden hose coupling.

View larger image

• For flammables and combustibles
• Choice of carbon steel or 316 stainless

   These economical pumps are loaded with features. Supplied with 2" NPS Bung adapter, fits 15-55 gallon drums. Built-in bonding and grounding wires are equipped with heavy-duty alligator clips. Delivers 8 ounces per stroke.

Carbon Steel Pump has highly polished carbon steel body with PTFE piston, packing and gasket. Plated steel suction tube with internal flame arrestor.

Stainless Steel Pump uses 316 stainless steel for all metal parts. PTFE piston, packing and gasket.

Optional Adjustable Metering Collar slips over handle to permit repeatable strokes from 2 ounces to 8 ounces.

Shown P55TST

View larger image

Complete unit includes 55:1 pump, drum cover, follower plate, 6 feet high pressure discharge hose, control handle, and Z-swivel. For the 16 gallon and 55 gallon units choose a system with or without a transport trolley. 5 gallon unit has built-in carrying handle. Units operate on 145 psi max. 1/4" NPT female air inlet, 3/8" NPT grease outlet. All units are pre-lubricated, requiring no mist lubricators.

Shown GPS16T

View larger image

• Designed for 16 gallon (120 lb.) grease drums
• No metal-to-metal contact for longer pump life
• Robust grease inlet cage withstands abuse
• Double acting for smooth fluid flow

View larger image

One touch gives no-effort flow up to 4 GPM

Dispenses at a controlled rate up to 4 gallons per minute, depending on viscosity. Simple to use: a few strokes of the upper handle pressurize the drum, or with compressed air up to psi. Built-in faucet delivers liquid. 100% polypropylene pump works with over 700 chemicals and is leak-proof, spill proof, and splash-proof. Fits nearly any container with 2” bung opening.

Pumps are available with the following seals: Nitrile, EPDM, Santoprene and Viton. Call for complete chemical compatibility information.

Optional Air Adaptor allows use of pump with compressors or plant air to deliver up to 4 gpm with 4 psi.

Other optional accessories available by special order: Remote Dischage Nozzle and Tygon hoses for specialty applications. Call Customer Service at 1-800-776-3786 for details.

Caution: Not for use with flammables.

Shown 100GT-ST

View larger image

• Includes 50' of hose
• Heavy-duty spring, bearings, and latch
• Multi-position hose guide for overhead mounting

Compact in design, these hose reels are perfect for reaching more service areas when pumping from a stationary tank. The ratchet latch allows users to work productively without excessive hose getting in the way. The heavy-duty spring, bearings and ratchet latch ensure many years of reliable service. High pressure ¼” hose is rated for 5000 psi. The medium pressure ½” hose withstands up to 1,800 psi. A hose inlet kit is required to connect the hose reel to the hose from the tank; sold separately.

View larger image

• Resettable LCD electronic display
• Flow rates up to 36 ounces per minute
• Sleek lightweight aluminum construction

This electronic meter with digital readout offers exceptional measurement and control of grease delivery while reducing fatigue. Handles up to 5000 psi with ± 3% accuracy. Inlet ¼” npt (f), outlet 1/8” npt (f). Includes two 1.5v alkaline batteries, rigid extension, and instruction manual.

View larger image

• Withstands up to 8,000 psi of working pressure
• 1/4" npt fluid inlet with coupler

View larger image

View larger image

Increased safety and ease of use in one neat package

• Quiet running electric or air motor
• Pump non-flammable liquids up to 300 cps
• Choice of polypropylene or stainless steel pump tubes for 5 - 55-gallon containers
• Sets include motor, pump tube, hose, nozzle, hose clips and wall bracket

     B2 Vario Pump Sets provide a complete solution to personal safety and environmental protection by not exposing the user or the environment to dangerous thin bodied acids and alkalis and chemicals such as battery acid, glycol, phosphoric acid, hydrochloric acid, oil-based lubricants and cleaner solvents. Both electric and air pump motors feature an infinite variable speed control with an integrated on/off switch that allows the operator to gradually regulate the delivery rate with one movement of the hand.

Pump Sets include: Motor (electric or air), pump tube (polypropylene or stainless steel), 5 ft. PVC (polyvinyl chloride) hose, polypropylene nozzle, stainless steel hose clips and painted steel wall bracket.

Electric B2 Motor: 180W, 110-120V, 60Hz. Ultra quiet running. Delivers 18.5 GPM with PP pump tube and 17.5 GPM with SS pump tube.

Air B2 Motor: 87 PSI, 13CFM. Quiet running. Delivers 17 GPM with PP pump tube and 15 GPM with SS pump tube.

Polypropylene Pump tube Wetted Parts: PP housing and impeller rotor, ETFE/PTFE bearing, Hastelloy C driveshaft

Stainless Steel Pump Tube Wetted Parts: 316 SS housing and driveshaft, ETFE/PTFE bearing, ETFE impeller rotor

Optional 0213-031 Totalizer accurately measures thin bodied non-flammable liquids in gallons, liters and imperial gallons. ±1% accuracy. Body is made of polypropylene. Wetted parts include PP, Hastelloy C and FPM (fluoro rubber) ideal for use with neutral and aggressive liquids

Optional Drum Adapters are made of polypropylene. Tapered and unthreaded adapter fits snuggly into a 2" bung opening. The pump slides through the center hole in the adapter. Adapter will fit loosely in a 70 mm pail cap opening and prevents the pump from tipping.

View larger image

Super versatility AND low cost all in one pump

• Delivers up to 8 ounces per stroke
• 316 stainless steel construction
• Teflon® piston and packing

Handles most liquids*, including methylene chloride, trichlorethane, Freon TE.  Drum pumps include plastic 2" NPS adapter. Pail pumps include a FLEXSPOUT® adapter or a set of 4 screw cap adapters (1-3/4", 2-1/8", 2-1/4" and 2-7/8").

Optional Adjustable Metering Collar MC842, attaches to pump shaft to permit repeatable strokes from 2 to 8 ounces.

Shown P100TSR

View larger image

Workhorse pump for gasoline and solvents

• FM Approved for Class I and Class II liquids
• Cast iron construction, carbon vanes

Rugged and versatile pumps handle light to medium-weight fuels, gasoline, chlorinated and petroleum solvents, ethers, ketones, acetates, turpentine. Cast iron housing and rotor, carbon vanes, telescoping steel suction tube with Buna-N (nitrile) o-ring and 2" NPS bung adapter. Certain solvents may require optional o-ring kit and/or solvent hose. Delivers up to 10 gallons per minute. Maximum viscosity 350 cPs. Made in USA.

Pump with Hose has ¾" x 8' anti-static nitrile hose, non-sparking aluminum nozzle and backflow preventer, and flame arresting baffle.

Drip Pan Pump has curved discharge spout and drip return pan with flame arresting screen.

Solvent O-Ring Kit has EPR and Vitron^® o-rings for the suction tube. Replaces nitrile o-ring for certain solvents.

Solvent Hose (not FM-approved) has nylon core. Replaces standard hose for certain solvents.

Shown DP210F

View larger image

Designed for free-flowing liquids up to 2,000 cps viscosity and 1.8 specific gravity. 40" long pump tube fits 2" bung opening. Seal-less design has 30 minute run-dry capability without damage. Features double suction impeller. Polypropylene and Kynar® pumps have convenient variable orifice discharge fitting.

Caution: When pumping flammables, use only stainless steel pump tube and explosion proof motor. Hose and grounding kit are also required. See static protection hose kits found in Accessories for Finish Thompson Pumps and Bonding and Grounding Wires.

48" pump tubes for use with IBCs are available by special order. Call Customer Service at 1-800-776-3786 for details.

Shown PFP-E1

View larger image

Ideal for corrosive chemicals, solvents, flammables (stainless models only) and other high purity or sanitary applications. Interchangeable pumps and motors help prevent cross-contamination of product. Designed for semi-viscous liquids. Maximum liquid temperature 150º F. All pumps in this series have a 1" hose barb. Tube length of 40" for 55-gallon drums.

USDA-Compliant models have sanitary construction for food plant use.

Air motor supplied with regulator valve and muffler. 

Bung adapter sold separately. See Accessories for Finish Thompson Pumps

Shown TTS-EX

View larger image

• Complete your pumping system with OEM accessories
• Designed to provide years of service

From static protection kit A101-521, with its 4' static hose made of XLPE (cross linked polyethylene), brass hose connection, 6' hose grounding wire and 6' motor grounding wire to galvanized steel bung adapter M100088, these OEM items will fit properly and do the job they are designed to do, removing the stress of dealing with improperly fitting aftermarket accessories.