Faucets

View larger image

So economical you can afford to put one on every drum

• Ideal for petroleum based products
• Self-closing push-lever handle
• Fits 3/4" bung opening
• Padlockable

Diecast zinc faucet body with durable nylon valve and an aluminum handle. Works with most non-corrosive liquids. Padlockable design guards against unauthorized use. 3/4" NPT inlet.

View larger image

Strong, tough, precise, and long-lasting

Operating handle lifts and turns to precisely control the flow. Ideal for petroleum oils, antifreeze and other non-corrosive liquids. Large hasp accommodates a large padlock for extra security. 3/4" NPT inlet.

ML1 - optional padlock provides optimum security.

SEL8-PTRD - optional 8” pull tight seal provides tamper evident security. Seal needs to be cut to be removed.

Note: NPT (National Pipe Tapered) female outlet is also known as FIP (Female Iron Pipe) thread is used on the outlet of faucet 650F. GHT (Garden Hose Thread) male thread is used on the outlet of faucet 650M.

Shown 650

View larger image

An investment in quality and long life

Very tough and long lasting self-closing faucet has a spring loaded handle that’s lockable in the closed position. Also features a hook to hold a pail handle for convenient draining.

ML1 - optional padlock provides optimum security.

Shown 110-34

View larger image

Economical safety and security

View larger image

Handle viscous AND corrosive liquids

• Padlockable
• Sight-gauge ready

This deluxe faucet will rapidly dispense even most viscous pourable liquids. Loaded with convenience features: padlockable handle (padlock or seal, sold separately), pail hook for hanging an empty pail and a ¾” threaded port for attaching a sight gauge (sold separately). Constructed of polyethylene/EVA (ethylene-vinyl acetate). Includes three black rubber gaskets; each designed for use with the three most common 2” flange styles. Optional SEL8-PTRD 8” pull tight security seal, that needs to be cut to remove, is an inexpensive alternative to a padlock.

For optimum security use optional Padlock ML1.

For tamper evident security use optional Security Seal SEL8-PTRD 8" pull tight security seal that needs to be cut to be removed.

Note: Pail hook is not designed to hold the weight of a filled pail. It is only meant for storing an empty pail between fills.

View larger image

Get ALL of the liquids you paid for out of your drums

• Recovers residual liquids, minimizes environmental costs
• Solid brass
• Fits 3/4" bung opening
• FM Approved

The 2 to 3 gallons of expensive product that’s usually left in your drum is expensive, and so is disposing of the drum with all that residue. Unique siphon device reduces it to just a few ounces and eliminates dangerous drum tipping or rolling. Siphon screws into 3/4" NPT bung opening. Opposite end accepts a 3/4" NPT male faucet thread. Adjustable collar adjusts for bungs in varying positions.

Drum Siphon Package includes 08311 drum siphon adapter and 502 FM-Approved brass safety faucet with PTFE seal, flame arrestor and padlockable handle.

View larger image

Easy-to-turn control knob works with gloved hands

• Easy-grip knob for fine control and positive shut off
• Precise flow control
• Meets FDA food handling regulations

700W & COM4417 2” Faucets have large bore openings deliver high flow, even with viscous liquids, and are designed for use with drums and certain bulk tanks, such as collapsible IBCs, that have a 2” NPS bung opening (See Attachments required for use with IBCs with inner liners). Both faucets can be disassembled for cleaning and conform to FDA regulations for food handling. Faucet Body: HDPE, Internal Valve: LLDPE, Gasket: Black Nitrile Rubber, Retaining Ring: Polypropylene.

700W Faucet features a vertical on/off control knob, vertical dispensing spout with male 2” BSP male threads and 2” BSP male threaded inlet.

COM4417 Faucet features an offset on/off control knob. With no downward spout, this tap considered an inline straight-through faucet with 2” BSP male threaded inlet and outlet, allowing bottom discharge from floor-level containers.

COM4439 2” Cutter Adapter is required when using faucets 700W or COM4417 with IBCs equipped with inner liners. The adapter attaches to container-side of the faucet and its stainless steel cutter pin pierces the liner as the faucet is screwed into container.

430P ¾” Faucet is ideal for use with faster-running liquids in drums, carboys, Gerri cans and other containers with ¾” NPS female threaded openings. Needle-style valve for maximum flow control precision. Gasket eliminates leakage. Faucet Body: Polyethylene, Gasket: Nitrile Rubber.

Shown 430P

View larger image

 Get precise flow control of your flammables

• FM Approved
• Fits ¾” bung opening
•  "Tap" style handle for precise flow control

Dispense flammable liquids into bottles and other containers with small openings or narrow-neck containers. Brass construction with internal flame arrestor and PTFE o-ring for handling non-corrosive flammable liquids with viscosity up to 350 cPs. 3/4" NPT male inlet and 3/4" outside diameter spout with 1/2" threaded inside diameter.

View larger image

Eliminates the mess of filling small neck bottles

• 8mm spout easily fills bottles
• Polypropylene/polyethylene construction
• 100% FDA Compliant construction

Filling free flowing liquids through small openings can be a frustrating and messy process. These faucets are specially designed to work with bottle openings as small as 3/8”. Polypropylene/polyethylene construction handles almost any non-flammable liquid. Half-turn on/off for quick, precise flow control.

420 faucet has ¾” external NPT Threads and natural rubber gasket for attaching to a ¾” drum bung opening. Faucet body: LLDPE Spigot/Spout: Polypropylene.

400-4401 faucet has a collar with 38 mm internal threads for attaching to containers with external 38 mm threads, generally found on Cubitainers^®. Faucet Body: LLDPE,  Spigot/Spout: Polypropylene, Screw Ring: Polypropylene

View larger image

Longer lasting basic faucet

View larger image

No more "chugging" or "spitting"!

• Unique two-way spout
• FDA compliant polyethylene construction
• Easy one-half turn on/off

Annoying “chugging” and splashing during draining happens when air can’t get back into the container. These unique faucets have an innovative two-way spout that positively eliminates the problem. 20 mm diameter spout drains fast, and the large handle provides fast precise flow control.

Shown 435

View larger image

High flow rate, low price!

• Made of FDA compliant material
• Perfect for use with foods
• Ideal for viscous liquids

Large 18 mm spigot for maximum flow. Water-like liquids are delivered at up to 296 ml/sec. Constructed of 100% FDA compliant materials. Faucet body is polyethylene, spout is polypropylene. Natural rubber gasket for leak proof seal.

View larger image

Precise control is ideal for fast flowing products

• 100% FDA compliant material
• NSF Certified for food handling

Need to carefully dispense a small amount of liquid? Spring loaded handle provides precise control from fully open to fully closed position. Handle can also be locked in open position for dispensing large amounts. Polypropylene body, EPT rubber cup seat and internal stainless steel spring. Faucet may be fully disassembled for cleaning. Tested to National Sanitation Foundation (NSF) standards.

View larger image

An industry favorite for thick liquids

Excellent for dispensing non-flammable viscous liquids. Super rugged cast iron gate valves have a large, nearly straight bore with an oval discharge opening angled at 45-60º for fast flow of thick liquids without splashing. The machined and lapped brass faceplate provides smooth operation and a perfect seal. Glossy black lacquer finish.

Standard Gate Valve has short formed-steel handle.

Long Handle Gate Valve has long cast iron handle for extra leverage and easier, more precise operation.

Lock Nut Gate Valve has lock nut and gasket. Gasket and nut tighten against drum, which permits the valve to be turned to any desired direction for draining without breaking the seal.

Self Closing Valve is available in 2" and 3/4" NPT sizes.

ML1 - optional padlock provides optimum security.

SEL8-PTRD - optional 8” pull tight seal provides tamper evident security. Seal needs to be cut to be removed.

NOTE: These gate valves are designed for liquids that have a minimum viscosity of 2,000 cPs.

Shown 700E20

View larger image

An easy drip-proof method for dispensing from drums in racks

• Eliminates drips, leaks, damaged faucets
• Attaches quickly to 2" round-head bung for draining
• Ensures maximum security and space efficiency

Drums stored horizontally are difficult to drain. This innovative drum tap fits over and seals tightly to the 2" round-head type (octagonal-base) bung opening. T-handle engages and unscrews the plug and controls the flow rate. Large opening permits viscous liquids to drain completely without spills or leaks. When finished, the handle reseals the plug and the tap is completely removed. No faucet to drip or break off. Glass-filled polypropylene construction with nitrile rubber o-ring seal handles most chemicals.

IMPORTANT: Not recommended for aromatic or chlorinated hydrocarbons such as toluene, xylene, benzene, trichloethylene, or turpentine.

View larger image

Improved corrosion resistance for water-based liquids

• Light weight, durable; ideal for liquids corrosive to iron
• Excellent for dispensing non-flammable viscous liquids
• Padlockable handle

These cast aluminum gate valves are lighter and easier to use than cast iron gates. They have a large, nearly straight bore with an oval discharge opening angled at 45-60º for fast flow of thick liquids without splashing. The machined and lapped brass faceplate provides smooth operation and a perfect seal. Short, sturdy 2” black enamel finish metal stamped handle.

Shown 700A20

View larger image

Safety and security are not expensive

• FM-Approved
• Solid Brass Faucet Body
• Fits ¾” bung opening
• Padlockable

Self-closing safety 3/4" NPT faucet with an internal flame arrestor is designed to handle light weight (non-viscous) flammable liquids. Features a PTFE seal for wide chemical resistance and padlockable handle for security. 

View larger image

Inexpensive and versatile

• Made of FDA compliant material
• 1/2 turn, positive on/off control

An excellent choice for use with foods. 100% FDA polyethylene construction.

Model 700P fits 2” bungs, has a large 2" bore for fast flow of liquids. Not recommended for use with flammables or temperatures above 125º F. 2” NPS inlet includes three white EPDM gasket choices for use with the three most common bung flange styles.

Models 401C and 401C-GOLD faucets have a 5/8" bore. 3/4" NPT inlet fits ¾” bung opening and does not require a gasket. Not recommended for use with flammables or temperatures above 125º F.

View larger image

Most economical self-closing faucet on the market

• For mid - to high-viscosity liquids
• Spring loaded pull valve automatically closes after each use
• Fits 2" bung opening
• Nitrile rubber seal

View larger image

Put the spout exactly where you need it

• FM Approved for handling flammables
• Self-closing, padlockable design
• Fits 3/4" bung opening
• Available in zinc, brass and stainless steel

View larger image

Solid brass for reliability and long life

Long handle gives extra leverage, precise flow control, and makes this faucet very easy to use. ¾” NPT male inlet. ¾” NPT female outlet spout is angled to make attaching a hose easier. Solid brass body with seal provided by chrome plated ball and PTFE disc.

View larger image

Get safety and security for your slow - moving liquids

• FM Approved
• Handle viscous, noncorrosive flammables above 2000 SSU viscosity

View larger image

Don't let humidity contaminate liquids stored in your drums!

• Protects products from moisture during storage
• Indicator window alerts user when cartidge change is needed

As liquid is drained out of a drum, air moves in. If the air is humid the water can condense in the drum and damage the contents. The desiccant cartridge dries the air as it enters the drum. Disposable cartridge absorbs up to .2 pounds of water vapor, dries air to a dew point of –100º F. Indicator window in cartridge changes from blue to pink when the cartridge needs to be replaced.

Dryer Cartridge is filled with calcium sulfate, measures 2 11/16" D x 10" L.

Adapter mounts cartridge in 3/4" or 2" NPS bung opening.

View larger image

View larger image