Drum Pumps & Faucets

View larger image

Economical, and built to stay that way

• Ideal for non-corrosive liquids
• Optional metering collar for repeatable dispensing

Steel drum pump is heavily nickel-chrome plated to prevent rust. Polyethylene piston and suction tube. Includes a 2” bung adapter. Optional Adjustable Metering Collar slips over handle to permit repeatable strokes from 2 to 8 ounces.

View larger image

Never worry about having the right pump for your product

• Stainless steel and PTFE for mild corrosives
• Delivers 26 ounces per stroke
• Pumps up to 1,000 cPs

Economical wide-spectrum hand pump transfers acids, alkalis, non-flammable solvents, detergents, oils, almost anything compatible with stainless steel and PTFE. Includes plastic 2" NPT  bung adapter. 1 1/2" O.D. x 41" H.

View larger image

Each pump has a durable diecast aluminum housing, stainless steel liner and piston shaft. Easy grip, lockable handle, telescoping suction tube fits 15 – 55 gallon drums with 2" NPS bung. Models BR150 and BR150M include a 5/8" x 8' Buna hose with an imbedded static wire and an aluminum nozzle. Flowmeter Model BR150M registers up to 100 gallons per delivery in 1/10 gallon increments, totalizes to 100,000 gallons.

Shown BR150

View larger image

View larger image

So economical you can afford to put one on every drum

• Ideal for petroleum based products
• Self-closing push-lever handle
• Fits 3/4" bung opening
• Padlockable

Diecast zinc faucet body with durable nylon valve and an aluminum handle. Works with most non-corrosive liquids. Padlockable design guards against unauthorized use. 3/4" NPT inlet.

View larger image

Why wrestle with a heavy pail to drain it?

Highly polished carbon steel body with polyethylene piston and packing, neoprene head gasket. Choice of two styles: with FLEXSPOUT^® adapter or with set of four screw cap adapters (1 3/4", 2 1/8", 2 1/4" and 2 7/8"). Adjustable Metering Collar (MC842) slips over handle and is secured with a set screw to permit repeatable strokes from 2 ounces to 4 ounces.

Shown P5S

View larger image

Reliable hand pump is ideal for dispensing small amounts of liquid. Delivers 4 ounces per stroke. Bonding and grounding wires have heavy-duty alligator clips. Supplied with four screw cap adapters (1 3/4", 2 1/8", 2 1/4" and 2 7/8") or FLEXSPOUT® adapter. Carbon Steel Pump has highly polished carbon steel with Fluoropolymer piston, packing and gasket for exceptional solvent resistance. Stainless Steel Pump has 316 stainless steel metal parts, Fluoropolymer piston, packing and gasket. Adjustable Metering Collar slips over handle to permit repeatable strokes from 2 ounces to 4 ounces.

Shown P5TST-S

View larger image

View larger image

Strong, tough, precise, and long-lasting

Operating handle lifts and turns to precisely control the flow. Ideal for petroleum oils, antifreeze and other non-corrosive liquids. Large hasp accommodates a large padlock for extra security. 3/4" NPT inlet.

ML1 - optional padlock provides optimum security.

SEL8-PTRD - optional 8” pull tight seal provides tamper evident security. Seal needs to be cut to be removed.

Note: NPT (National Pipe Tapered) female outlet is also known as FIP (Female Iron Pipe) thread is used on the outlet of faucet 650F. GHT (Garden Hose Thread) male thread is used on the outlet of faucet 650M.

Shown 650

View larger image

Strength of steel -- and economy -- in one pump

Ideal for lighter, non-water base, non-corrosive fluids, such as oil and non-flammable solvents. Solid steel construction with brass piston rings. Curved discharge spout can be removed and replaced with 3/4" garden hose. Optional Hose Assemblies are made of clear vinyl with a 1/2" inside diameter and include a 3/4" garden hose coupling.

View larger image

• For flammables and combustibles
• Choice of carbon steel or 316 stainless

These economical pumps are loaded with features. Supplied with 2" NPS Bung adapter, fits 15-55 gallon drums. Built-in bonding and grounding wires are equipped with heavy-duty alligator clips. Delivers 8 ounces per stroke. Carbon Steel Pump has highly polished carbon steel body with Fluoropolymer piston, packing and gasket. Plated steel suction tube with internal flame arrestor. Stainless Steel Pump uses 316 stainless steel for all metal parts. Fluoropolymer piston, packing and gasket. Repair Kits include pre-assembled handle/piston, threaded head and internal parts. Adjustable Metering Collar slips over handle to permit repeatable strokes from 2 ounces to 8 ounces.

Shown P55TST

View larger image

View larger image

An investment in quality and long life

Very tough and long lasting self-closing faucet has a spring loaded handle that’s lockable in the closed position. Also features a hook to hold a pail handle for convenient draining.

ML1 - optional padlock provides optimum security.

Shown 110-34

View larger image

Economical safety and security

View larger image

Handle viscous AND corrosive liquids

• Padlockable
• Sight-gauge ready

This deluxe faucet will rapidly dispense even most viscous pourable liquids. Loaded with convenience features: padlockable handle (padlock or seal, sold separately), pail hook for hanging an empty pail and a ¾” threaded port for attaching a sight gauge (sold separately). Constructed of polyethylene/EVA (ethylene-vinyl acetate). Includes three black rubber gaskets; each designed for use with the three most common 2” flange styles. Optional SEL8-PTRD 8” pull tight security seal, that needs to be cut to remove, is an inexpensive alternative to a padlock.

For optimum security use optional Padlock ML1.

For tamper evident security use optional Security Seal SEL8-PTRD 8" pull tight security seal that needs to be cut to be removed.

Note: Pail hook is not designed to hold the weight of a filled pail. It is only meant for storing an empty pail between fills.

View larger image

View larger image

Get ALL of the liquids you paid for out of your drums

• Recovers residual liquids, minimizes environmental costs
• Solid brass
• Fits 3/4" bung opening
• FM Approved

The 2 to 3 gallons of expensive product that’s usually left in your drum is expensive, and so is disposing of the drum with all that residue. Unique siphon device reduces it to just a few ounces and eliminates dangerous drum tipping or rolling. Siphon screws into 3/4" NPT bung opening. Opposite end accepts a 3/4" NPT male faucet thread. Adjustable collar adjusts for bungs in varying positions.

Drum Siphon Package includes 08311 drum siphon adapter and 502 FM-Approved brass safety faucet with PTFE seal, flame arrestor and padlockable handle.

View larger image

• Equipped with current dispense display, resettable totalizer, and non-resettable totalizer
• Maximum flow rate of 35 ounces per min. + / - 3%
• Display is powered by two 1.5 volt AAA batteries

View larger image

• Designed for 16 gallon (120 lb.) grease drums
• No metal-to-metal contact for longer pump life
• Robust grease inlet cage withstands abuse
• Double acting for smooth fluid flow

View larger image

One touch gives no-effort flow up to 4 GPM

Dispenses at a controlled rate up to 4 gallons per minute, depending on viscosity. Simple to use: a few strokes of the upper handle pressurize the drum, or with compressed air up to psi. Built-in faucet delivers liquid. 100% polypropylene pump works with over 700 chemicals and is leak-proof, spill proof, and splash-proof. Fits nearly any container with 2” bung opening. Pumps are available with the following seals: Nitrile, EPDM, Santoprene and Viton. Call for complete chemical compatibility information.

Optional Air Adaptor allows use of pump with compressors or plant air to deliver up to 4 gpm with 4 psi. Other optional accessories available by special order: Remote Dischage Nozzle and Tygon hoses for specialty applications. Ask your BASCO Customer Service Rep for details.

Caution: Not for use with flammables.

Shown 100GT-ST

View larger image

Easy-to-turn control knob works with gloved hands

• Easy-grip knob for fine control and positive shut off
• Precise flow control
• Meets FDA food handling regulations

700W & COM4417 2” Faucets have large bore openings deliver high flow, even with viscous liquids, and are designed for use with drums and certain bulk tanks, such as collapsible IBCs, that have a 2” NPS bung opening (See Attachments required for use with IBCs with inner liners). Both faucets can be disassembled for cleaning and conform to FDA regulations for food handling. Faucet Body: HDPE, Internal Valve: LLDPE, Gasket: Black Nitrile Rubber, Retaining Ring: Polypropylene.

700W Faucet features a vertical on/off control knob, vertical dispensing spout with male 2” BSP male threads and 2” BSP male threaded inlet.

COM4417 Faucet features an offset on/off control knob. With no downward spout, this tap considered an inline straight-through faucet with 2” BSP male threaded inlet and outlet, allowing bottom discharge from floor-level containers.

COM4439 2” Cutter Adapter is required when using faucets 700W or COM4417 with IBCs equipped with inner liners. The adapter attaches to container-side of the faucet and its stainless steel cutter pin pierces the liner as the faucet is screwed into container.

430P ¾” Faucet is ideal for use with faster-running liquids in drums, carboys, Gerri cans and other containers with ¾” NPS female threaded openings. Needle-style valve for maximum flow control precision. Gasket eliminates leakage. Faucet Body: Polyethylene, Gasket: Nitrile Rubber.

Shown 430P

View larger image

• Includes 50' of hose
• Heavy-duty spring, bearings, and latch
• Multi-position hose guide for overhead mounting

Compact in design, these hose reels are perfect for reaching more service areas when pumping from a stationary tank. The ratchet latch allows users to work productively without excessive hose getting in the way. The heavy-duty spring, bearings and ratchet latch ensure many years of reliable service. High pressure ¼” hose is rated for 5000 psi. The medium pressure ½” hose withstands up to 1,800 psi. A hose inlet kit is required to connect the hose reel to the hose from the tank; sold separately.

View larger image

 Get precise flow control of your flammables

• FM Approved
• Fits ¾” bung opening
•  "Tap" style handle for precise flow control

Dispense flammable liquids into bottles and other containers with small openings or narrow-neck containers. Brass construction with internal flame arrestor and PTFE o-ring for handling non-corrosive flammable liquids with viscosity up to 350 cPs. 3/4" NPT male inlet and 3/4" outside diameter spout with 1/2" threaded inside diameter.

View larger image

Eliminates the mess of filling small neck bottles

• 8mm spout easily fills bottles
• Polypropylene/polyethylene construction
• 100% FDA Compliant construction

Filling free flowing liquids through small openings can be a frustrating and messy process. These faucets are specially designed to work with bottle openings as small as 3/8”. Polypropylene/polyethylene construction handles almost any non-flammable liquid. Half-turn on/off for quick, precise flow control.

420 faucet has ¾” external NPT Threads and natural rubber gasket for attaching to a ¾” drum bung opening. Faucet body: LLDPE Spigot/Spout: Polypropylene.

400-4401 faucet has a collar with 38 mm internal threads for attaching to containers with external 38 mm threads, generally found on Cubitainers^®. Faucet Body: LLDPE,  Spigot/Spout: Polypropylene, Screw Ring: Polypropylene

View larger image

• Resettable LCD electronic display
• Flow rates up to 36 ounces per minute
• Sleek lightweight aluminum construction

This electronic meter with digital readout offers exceptional measurement and control of grease delivery while reducing fatigue. Handles up to 5000 psi with ± 3% accuracy. Inlet ¼” npt (f), outlet 1/8” npt (f). Includes two 1.5v alkaline batteries, rigid extension, and instruction manual.

View larger image

Longer lasting basic faucet

View larger image

• Withstands up to 8,000 psi of working pressure
• 1/4" npt fluid inlet with coupler

View larger image

View larger image

No more "chugging" or "spitting"!

• Unique two-way spout
• FDA compliant polyethylene construction
• Easy one-half turn on/off

Annoying “chugging” and splashing during draining happens when air can’t get back into the container. These unique faucets have an innovative two-way spout that positively eliminates the problem. 20 mm diameter spout drains fast, and the large handle provides fast precise flow control.

Shown 435

View larger image

High flow rate, low price!

• Made of FDA compliant material
• Perfect for use with foods
• Ideal for viscous liquids

Large 18 mm spigot for maximum flow. Water-like liquids are delivered at up to 296 ml/sec. Constructed of 100% FDA compliant materials. Faucet body is polyethylene, spout is polypropylene. Natural rubber gasket for leak proof seal.

View larger image

Super versatility AND low cost all in one pump

• Delivers up to 8 ounces per stroke
• 316 stainless steel construction
• Teflon® piston and packing

Handles most liquids*, including methylene chloride, trichlorethane, Freon TE.  Drum pumps include plastic 2" NPS adapter. Pail pumps include a FLEXSPOUT^® adapter or a set of 4 screw cap adapters (1-3/4", 2-1/8", 2-1/4" and 2-7/8"). Optional Adjustable Metering Collar MC842, attaches to pump shaft to permit repeatable strokes from 2 to 8 ounces.

Shown P100TSR

View larger image

• FM Approved for Class I and Class II liquids
• Cast iron construction, carbon vanes

Rugged and versatile pumps have cast iron housing and rotor, carbon vanes, telescoping suction tube with Buna-N (nitrile) o-ring and 2" NPS bung adapter. Handles light to medium-weight fuels, gasoline, chlorinated and petroleum solvents, ethers, ketones, acetates, turpentine. Certain solvents may require optional o-ring kit and/or solvent hose. Delivers 10 gallons per minute. Maximum viscosity 350 cPs. Made in USA.

 Pump with Hose has ¾" x 8' anti-static nitrile hose, non-sparking aluminum nozzle and backflow preventer, and flame arresting baffle. Drip Pan Pump has curved discharge spout and drip return pan with flame arresting screen. Solvent O-Ring Kit has EPR and Vitron® o-rings for the suction tube. Replaces nitrile o-ring for certain solvents. Solvent Hose (not FM-approved) has nylon core. Replaces standard hose for certain solvents.

Shown DP210F

View larger image

Designed for free-flowing liquids up to 2,000 cPs viscosity and 1.8 specific gravity. 40" long pump tube fits 2" bung opening. Seal-less design has 30 minute run-dry capability without damage. Features double suction impeller. Polypropylene and Kynar® pumps have convenient variable orifice discharge fitting. Totally Enclosed Fan Cooled Motor (TEFC) is designed for corrosive environments. 1/2 hp and 1 hp, double insulated, 110 volt, 50/60 Hz, single-phase. Handle has built-in switch, thermal overload protection with manual reset, 12' cord with plug. 1 hp motor includes speed regulator for precise adjustment of fluid flow. Open Drip-Proof Motor (ODP) is designed for non-corrosive environments. 1/2 hp, 110 volt, 50/60 Hz, single-phase. Handle has built-in switch, thermal overload protection with manual reset, 12' cord with plug. Explosion-Proof Motor (EP) is 1/10 hp, double insulated, 110 volt, 50/60 Hz, single-phase, with 12' three-wire cord without plug. CSA-Listed for Class I, Division I, Group D. Air Motor (Air) develops 1/2 hp, uses 17 – 25 CFM @ 50 – 80 psi. Supplied with regulator valve and muffler.  All pumps in this series have a 1" hose barb.

Note: When pumping flammables, use only a stainless steel pump tube with an explosion proof motor and be sure to use a static protection hose kit found in Accessories for Finish Thompson Pumps. Container will also require grounding. See Bonding and Grounding Wires.

Shown PFP-E1

View larger image

View larger image

Precise control is ideal for fast flowing products

• 100% FDA compliant material
• NSF Certified for food handling

Need to carefully dispense a small amount of liquid? Spring loaded handle provides precise control from fully open to fully closed position. Handle can also be locked in open position for dispensing large amounts. Polypropylene body, EPT rubber cup seat and internal stainless steel spring. Faucet may be fully disassembled for cleaning. Tested to National Sanitation Foundation (NSF) standards.

View larger image

An industry favorite for thick liquids

Excellent for dispensing non-flammable viscous liquids. Super rugged cast iron gate valves have a large, nearly straight bore with an oval discharge opening angled at 45-60º for fast flow of thick liquids without splashing. The machined and lapped brass faceplate provides smooth operation and a perfect seal. Glossy black lacquer finish.

Standard Gate Valve has short formed-steel handle.

Long Handle Gate Valve has long cast iron handle for extra leverage and easier, more precise operation.

Lock Nut Gate Valve has lock nut and gasket. Gasket and nut tighten against drum, which permits the valve to be turned to any desired direction for draining without breaking the seal.

Self Closing Valve is available in 2" and 3/4" NPT sizes.

ML1 - optional padlock provides optimum security.

SEL8-PTRD - optional 8” pull tight seal provides tamper evident security. Seal needs to be cut to be removed.

NOTE: These gate valves are designed for liquids that have a minimum viscosity of 2,000 cPs.

Shown 700E20

View larger image

Ideal for corrosive chemicals, solvents, flammables (stainless models only) and other high purity or sanitary applications. Interchangeable pumps and motors help prevent cross-contamination of product. Designed for semi-viscous liquids. Maximum liquid temperature 150ºF. USDA-Compliant models have sanitary construction for food plant use. Air motor supplied with regulator valve and muffler. All pumps in this series have a 1" hose barb. Adapter sold separately. Tube length of 40" for 55-gallon drums.

Shown TTS-EX