Metal Band

View larger image

The most popular drum heater on the market!

• Increase flow rate of viscous materials
• Heater models for steel and plastic drums, pails
• Choice of heating controls

Durable heaters install instantly with spring-loaded toggle clamp. Rugged aluminized steel construction with internal fiberglass insulation (except LIMD55-115). Choice of three heating controls. All are equipped with neon pilot light and 6' power cord and are warranted for one year. UL-Listed and CSA certified.

AGM and TRX Thermostat Control with Three-Heat Switch designed for use on steel drums and pails with materials with good heat receptivity. Thermostat bulb senses temperature in an area distant from the heating elements. Three-heat switch allows three wattage ranges per thermostat setting. AGM heaters operate on 120 volts, up to 1750 watts, with standard 3-prong plug. TRX heaters operate on 120 or 240 volts, up to 1920 watts, with NEMA plug. For steel drums and pails only, that do not contain a removable plastic liner.

SRX Infinite (Variable) Control with Three-Heat Switch designed for use on steel drums and pails with materials that are subject to charring, burning or separation, such as food, chocolate, honey, light oils, and undercoating materials. These heaters do not have a thermostat and will not automatically reach and hold a given temperature. The function of the infinite control is to cycle a current on and off into your material. This provides a gentle warming action to the material that is being heated. Infinite control operates within each of three wattage ranges for closer heat control. For steel drums and pails only, that do not contain a removable plastic liner.

LIM Pre-Set (Non-adjustable) Thermostat designed for heating materials in high density polyethylene drums and pails. Thermostat is factory set; will not exceed the maximum plastic-safe temperature of 165° F recommended by many plastic drum manufacturers. Simple on-off power control.

For indoor use only. Units are not moisture-proof or explosion-proof. Not for use with flammables or near a flammable area.

AGM, TRX and SRX series are not for use with plastic drums and pails or drums and pails that contain a removable plastic liner.

Caution: Allowing liquid in a container to fall below the level of the heater will render the heater ineffective and could irreparably damage the baked on epoxy phenolic lining in lined steel drums and pails.

Note: NEMA plug 5-15P is a standard three-prong plug. All other plugs require matching NEMA outlet.

View larger image

Save money by buying just the heat you need!

These added value electric drum and pail heaters deliver up to 1250 watts of dependable heating power, 25% more power than other heaters in its price class. The 0º–550º F adjustable thermostat provides a wide range for different heating requirements. Supplied with 6' cord and standard three prong plug. Rugged aluminized steel construction with quick release clamp.

Not for use with plastic drums and pails that contain a removable plastic liner. Not for use with flammable materials or near a flammable area. For indoor use only. See our other heaters designed to heat plastic drums.

Caution: Allowing liquid in a container to fall below the level of the heater will render the heater ineffective and could irreparably damage the baked on epoxy phenolic lining in lined steel drums and pails.

Shown 55VAL

View larger image

Ideal for safely warming honey

Primarily designed for use with plastic pails, this 5 gallon aluminized steel pail heater is factory engineered to maintain a constant heater band temperature of 165° F while in contact with a full pail.  Fits plastic or metal pails, tapered and straight sided pails 9 1/2" to 12" in diameter. 3 1/4" wide band for better heat dissipation. Equipped with a hose clamp style screw mechanism for installing heater to pail. Screwdriver is required. Supplied with 6' cord and three-prong plug. 120VAC, 100W. Not for use with flammable materials or near a flammable area. For indoor use only.

Note: Use only with high density plastic pail to insure pail will not melt.

View larger image

Shed the water weight and watch disposal costs go DOWN!

• Heater evaporates up to 1.3 gallons of water per hour
• Shuts off when all the water is evaporated

Unique heater fits standard 55 gallon steel drums, reduces the volume of watery waste requiring disposal. Rugged aluminized steel housing. Equipped with a thermostat and resetable high limit cut off switch. When the water based material is reduced below the drum heater, the high limit switch will activate shutting off the heater.  Once the container is refilled, you will need to manually reset the heater by pressing the black reset button located on the front panel. Thermostat range 70º – 250º F. Operates on 240V, 1-Phase, 3,000 watts. Heater supplied with 6' cord and high ampere plug. Not for use with flammable materials or in hazardous areas.

Industrial outlet required to match NEMA plug.

Note: Not for use with plastic drums or drums that contain a removable plastic liner. The baked on epoxy phenolic lining in lined steel drums will discolor if liquid is allowed to fall below the level of the heater. EPA Regulations require the user to ensure that the waste material being reduced will not release toxic material into the atmosphere.

View larger image

Keep spills and drips away from your valuable heater