Heaters

View larger image

Heater/Cooler units have embossed channels for steam, hot or cold water, or refrigerant*, All welded 18/16 gauge carbon steel construction with smooth inner panel for efficient heat transfer. Features quick acting toggle clamp for easy installation and removal and an insulated handle for safe handling. A single section unit will heat a 55 gallon steel closed drum from 60° F to 160° F in 4 hours using 150 psig steam.  1/2" IPS (iron pipe size) female inlet and outlet pipe couplings. Multi-section units are supplied already piped together.

Hinged-Back Style has a continuous hinge at the back of the unit for easy installation and removal.

Slip-Over Style has a continuous jacket that is designed to slip over the top of a container. Expandable opening at one end has a toggle style clamp to secure the unit in place.

Drum Cradle Style is available in carbon steel only. It has a heavy steel pipe frame and three half sections of heating/cooling channels. Cradle unit will heat a closed, properly ventilated 55 gallon steel drum of water from 60° F to 160° F in approximately 2 1/2 hours using 150 psig steam. The cradle unit is equipped with a 3/4" MPT (male pipe thread) inlet and outlet.

Immersion Style is designed to come in contact with the liquid it is to heat or cool by placing it directly into a 55 gallon drum. 3/4" MPT connections standard on units without hoses. Maximum operating steam pressure without the use of hoses is 250 psig and with 3/4" I.D. x 42" steam hoses, 200 psig working pressure at 380° F. Not available with painted finish.

Hoses, if included, are steam hoses made of rubber with wire braid reinforcement.

Carbon Steel Models have a light coating of oil on the exterior surface to help prevent rust.

Painted Carbon Steel Models have a royal blue exterior, baked on, painted finish for more substantial rust prevention.

Stainless Steel Models are made of stainless steel platecoil.

*If using refrigerant, please notify your BASCO Customer Service Representative. Plain end pipes or socket weld fittings will replace standard couplings at no extra charge.

View larger image

Keep spills and drips away from your valuable heater

View larger image

View larger image

No need to wait for heat - just drop in!

Delivers fast and even heat. Heavy fiberglass insulation directs heat into the pail. Thermostat has pilot light and a "hurry-up" switch that overrides the thermostat to provide fast heat start-up. 12" inside diameter, 9-3/4" depth.  Supplied with 8' cord and three-prong plug. Not for use with plastic pails or in flammable areas.

View larger image

Product already warmed up or cooled down? Keep it that way!

• For transport or storage of temperature sensitive products
• Prevents freezing, heat, and condensation damage
• Patented multilayer insulating technology

The quilts utilize a layered insulating system that is designed to deliver non-mechanical thermal variation protection. Each layer is designed to act as a barrier to any of the heat transfer mechanisms, such as conduction, convection, moisture, and radiation. Ruggedly built and easy to install.

Drum Quilt^™ protects the contents of a 55 gallon drum

Pallet/IBC Quilt^™ protects 4 palletized drums, palletized loads, or one 275 gallon plastic IBC in metal cage.

Note: Quilts are not designed for use with heaters of any kind.

View larger image

Flexible and lightweight for go anywhere heating

• Adjustable thermostat
• Use with steel or plastic pails and drums
• CE Certified

View larger image

Don't guess the temperature of your product

• Corrosion and shock resistant
• Large 3" easy-read dial
• +/-1% full scale NIST traceable accuracy
• Choice of 0-200° F or 50-550° F temperature range

This thermometer is engineered with safeguards against moisture damage, vibration, and chemical attack and features a hermetically sealed dial mechanism, 304 stainless steel construction, and a safety glass, shatter resistant, lens. The stainless steel 1/4" diameter, 18" long stem is ideal for accurately measuring the temperature of fluid being heated in a 55 gallon steel or plastic drum. Supplied with a 3/4", 304 SS adapter bushing for threading into the 3/4" bung opening. Longer or shorter stem lengths and thermometers with higher or lower temperature ranges are available by special order.

Shown TSG55018

View larger image

Now you can roll your heated product right to the job!

• Drum dolly heats 55 gallons of water from room temperature to 140º F in 8 hours
• Ideal for heat-sensitive materials
• 900 lb. load capacity

          Unique and versatile heater drum dolly is designed for non-flammable, non-hazardous materials and for indoor use only. Unit has a 15-1/4" square aluminum heating platen for efficient heat transfer. Adjustable infinite control switches on and off to prevent improper heat build-up.

These heaters do not have a thermostat and will not automatically reach and hold a given temperature. Dolly rolls on four 3" diameter phenolic swivel casters. 28-1/2" outside diameter x 24" inside diameter x 6" high. Supplied with 6' pull chain and 6' power cord with a NEMA plug.

Industrial outlet required to match NEMA plug listed in the table.

Shown HDD55