MORSE® Forklift Kontrol Karrier™ Lifts and Dumps Drums

View larger image

When handling a plastic drum that is secured in a MORSE drum saddle the use of a Bracket or a Rim Clamp is required to prevent the plastic drum from slipping out of the saddle.

Bracket is the best all-around choice. It is designed for use with rimless or rimmed plastic drums with diameters of 19" to 23.5" (30-55 gallon) and a height of 31" to 39". The Bracket is also recommended when handling fiber drums within the same dimensions. All necessary hardware is included along with installation instructions.

Diameter Adapters 55/30-19 and 55/30-20.5 must be used in conjunction with the Bracket Option with drums 19" to 20.5" in diameter.

Diameter Adapters 55/30-14.5, 55/30-16 and 55/30-17 already include adjustable top and bottom bracket-style supports of a different design, so the bracket option is not required.

Rim Clamp may be preferred when handling 55 gallon plastic drums with a top rim that have a diameter of 22" to 23.5". All necessary hardware is included along with installation instructions.

Note: Not every style and size option will work with every MORSE unit.

Call Customer Service at 1-800-776-3786 for assistance with selecting options.

"Must Have" accessories for handling plastic drums

• Prevent plastic drums from slipping through the drum saddle
• Install onto MORcinch or tube socket drum saddles

View larger image

Simply insert the correct size adapter into the drum holder. Installation and removal of the adapter is quick and easy. Diameter adapters for drums with 17 1/2 to 14" diameters include upper and lower brackets for supporting the drum. Includes T-handle tighteners for adjusting the brackets to different drum heights.

Spark resistant models are available through special order.

Note: Not every style and size option will work on every MORSE® unit. Call Customer Service at 1-800-776-3786 for assitance with selecting options.

Double and triple the utility of your Karrier

• Allows Karrier units to accept smaller diameter drums
• Available in carbon steel and stainless steel
• Spark resistant models available through special order

View larger image

When dispensing a heavy drum, especially an unbalanced drum, operators may need to manually lock the pull-chain or crank handle to prevent unwanted drum rotation. The unique MORStop Tilt-Brake mechanism automatically stops and holds the drum tilt angle. MORStop can be used with any of the hand-crank or chain-wheel operated manual-gear-tilt Morse models with capacities up to 1500 lbs. for full drums in the series 185, 285, 400. Order the Tilt-Brake factory installed on new MORSE^® drum handling equipment or self install on existing units.

Note: Not every style and size option will work on every MORSE® unit. Call Customer Service at 1-800-776-3786 for assistance with selecting options.

• Automatically stops and holds drum tilt angle
• Smooth, quiet operation in both directions