Drum Grabbers

View larger image

• Designed for use with any size fork
• Lift, transport and lower drums without leaving the driver's seat
• Drum Models for 15, 30, 55 and 85 gallon steel drums
• Up to 1500 lbs. capacity per drum

These adjustable drum grabbers come in single and double drum versions and adjust to accept 15, 30, 55, or 85 gallon drums, depending on the model.

All VF Series Grabbers require a 22 1/2" outside fork spread and are available with spark resistant brass liners on grabber arms. Carriage mounted grabbers are also available. Ask your BASCO Customer Service Representative for details.

Shown VF1255

View larger image

Handle 4 drums at a time and get the job done faster and more safely!
Just slide it on your forks and go.

• 8,000 lb. total capacity
• No hydrauclic or electrical connections required
• Ideal for palletizing drums or unloading trailers

View larger image

Move large numbers of drums quickly and easily

• Lift and transport drums without leaving the driver's seat
• Models for 55 gallon and 55/30 gallon drums
• 1,000 lb. capacity per drum

View larger image

Bring real power and control to close-quarter steel drum pouring and handling tasks!

• Grabs, lifts, and rotates drums 360°
• Operator never leaves the controls
• Capacity 800 lbs.

Drum handler picks up steel drums 18" – 24" diameter. Operator just rolls unit up to drum and flips a switch. Electrically actuated rubber-lined arms close around drum. Drum is lifted and rotated by built-in hydraulic power pack. Uses standard 12 volt DC deep-cycle battery (included). Built-in charger plugs into standard 110 VAC grounded outlet. Welded steel frame has single post design for maximum operator visibility. 24 3/4" long legs, 25 1/2" between legs. Rolls on 3" diameter polyurethane front wheels and 4" diameter swivel rear casters.

Shown 8585

View larger image

• Economical and easy to use
• Handles 55-gallon steel drums
• Designed for low volume use

Automatically grabs 55-gallon ringed steel drums for moving, stacking, or palletizing. Utilizes a unique knuckle-gripping system and natural pressure of the loaded drum. This fork mounted unit is designed for limited drum handling needs. Usable fork tube size is 1 5/8" H x 5 5/8" W x 16" D.

Shown 7398

View larger image

• Drum grabber handles 30 and 55 gallon plastic drums without damage
• Lifts, transports and lowers plastic drums -- forklift driver never leaves his seat

Patented drum grabber has smooth-action spring-loaded jaws that grip tightly, reduces risk of punctures or tears. Drums can be picked or lowered in tight spaces. Works with all plastic drums with at least 3/16 top lip (chime). Slips on and locks to forks without tools. Fork pockets measure 5 3/8" x 1 1/2".

Note: Not for use with steel drums.

View larger image

View larger image

Mechanical drum grabber handles one or two drums without the operator leaving his seat. Proven mechanism and massive steel jaws grip more securely as the load increases. Works with straight wall drums, even drums with damaged sides. Welded steel construction for ultra-reliability. Maximum capacity 1500 lbs. per drum. Fork-Mount Models have drive-in 26 5/8" deep fork pockets spaced 16 1/2" apart, accepts forks up to 2 1/2" x 6 1/2". Carriage Mount Model installs directly on the fork truck carriage. Ideal for moving drums in crowded areas. Belted Back Rest Models have fabric belt on bottom drum rest. Prevents marring and scratching of drums.

Shown 288-2

View larger image

Spring-and-cam actuated jaws grip automatically as the drum is lifted and release when the drum is set down. Drum grabber jaws are 3" wide x 15" long, lined for steel and fiber drums and unlined for plastic drums. Fork pockets are 25" apart on center. Unit fits on forks measuring 1 1/2" H x 6" W. T-Bolts secure grabber to forklift truck.

Shown 6145

View larger image

Lift, transport, stack, palletize, rotate, invert, and dump from a drum, all without leaving the driver's seat. Large rubber lined jaws grip the drum securely without marring or denting. Drum grabber is powered by (2) 12-Volt deep cycle batteries (included). Equipped with a built-in battery charger and control box with a 4' - 20' coil cord. Capacity is 2000 lbs. when used for lifting or rotating and 1800 lbs.* for dumping. Fork spread is 20 1/2" and fork tubes inside dimensions: 2 1/2" H x 6 1/2" W x 28" L.

Shown 6135

View larger image

View larger image

Powerful fork-mounted drum handler securely grips drums or cylinders from 18" to 28" diameter. Hydraulic power allows operator to grab, lift, transport and dump containers over rough surfaces or even outdoors. Rubber-lined jaws won't mar drums. Drive-in fork tube, safety chain secures drum grabber to the forklift. Self-Powered Handler can be used on any lift truck. No modifications to the truck are needed. Built-in hydraulic power unit uses two 12 volt deep-cycle batteries (included). Supplied with built-in battery charger, control box and coil cord that extends from 4' to 20'. Forklift Powered Handler requires forklift to be equipped with auxiliary valve control and quick connect hydraulic couplers.

* Dumping capacity with an open top drum is limited by the strength and rigidity of the drum. The drum must be capable of retaining its cylindrical shape while dumping.

View larger image

View larger image

• 1,000 lb. capacity per drum
• Drum grabber for steel, plastic, and fiber drums
• Features WESCO Exclusive Auto Grip Lock

The Gator Grip drum grabber allows forklift operators to lift and release drums automatically without leaving their seat. It features a revolutionary design that offers a true lock on the drum rim, even through rough terrain. Gator Grip jaws automatically lock closed to maintain a positive lock while transporting a drum. It will not unlock until the drum is placed on the ground. Constructed of all welded steel. Heavy duty 1,600 lb. capacity models are available. Ask your BASCO Customer Service Representative for details.

Shown EGG-F1

View larger image

• Handles virtually any chimed drum regardless of size or type
• Fits on forks of any lift truck with easy on/off safety chains
• All mechanical -  requires no hydraulics or battery power

For handling less than 300 drums per month, the Eagle Grip 1 or 2 Series is the best choice. Economical, yet dependable, these drum lifters are fantastic for handling various drums in lower volume applications. They are designed to slide on and off a fork truck with ease. The unit will operate as quickly as the forks can be lifted and will never release the drum until it is properly rested on the floor. If you are working with flammable materials, an Optional Spark Resistant Package is available. The kit includes a bronze jaw & belt base eliminating any metal on metal static sparks from occurring. Special order scale options available.

Shown EG2LDCM-F

View larger image

• Handles virtually any chimed drum regardless of size or type
• Fits on forks of any lift truck with easy on/off safety chains
• All mechanical -  requires no hydraulics or battery power

If you're handling over 300+ drums per month these highly engineered drum grabbers are built to do the job and ensure dependable drum handling for many years. American craftsmanship allows these units to accurately and consistently handle virtually any steel, plastic, or fiber drum regardless of size. They achieve this by lifting the drum by its chime (lip) which is the strongest point on any drum. The units will operate as quickly as the forks can be lifted and will never release the drum until it is rested on the ground. Narrow Frame Models are only 24" wide making them ideal for maneuvering in tight spaces. Optional Spark Resistant Package alleviates any static sparks from occurring at the lift point. Special order scale option available. Ask your BASCO Customer Service Representative for details.

Shown EG4DCM-F