Drum Cradles

View larger image

Keeps your drums ready to dispense liquid

High capacity drum cradle with exclusive skid resister frame which eliminates slippage while loading. Nose plate has built-in lower chime hook to prevent sliding. Retractable zinc-plated tipping lever allows easy one-man drum tipping. Frame measures 30" L x 18" W x 20-1/4" H. Ships assembled.

Note: Steel drums must be at least 29” H and have a top rim/chime for the chime hook on the handle to engage with the drum.

Shown DSPU-H

View larger image

Move, Drain, and Store -- All In One!

• Handles 55 gallon steel drums
• 20" drain height
• 1,000 lb. capacity

BASCO's combination drum cradle has a retractable chime hook and retractable oak handles. Handles extend from 43-1/2" to 64" to provide extra leverage and make it much easier to handle when loaded.  Heavy angle steel frame has an exclusive skid resister to prevent the cradle from slipping during loading. Frame rollers allow rotating drum for mixing or draining. Steel frame is 22" H x 18-1/2" W.

Welded Models ship fully assembled ready to use.

Knocked Down (KD) Models ship in a carton. Some assembly required.

Note: Steel drums must be at least 29” H and have a top rim/chime for the chime hook to engage with the drum.

Shown W12P

View larger image

Economical drum storage and dispensing

Built-in retractable tipping lever for fast efficient handling. Steel cradle frame is 32 1/2" long x 19 1/2" wide, requiring some easy assembly.

Inboard Wheel Model has 2 1/2" x 1" polyolefin wheels mounted inside the frame for storing in tight spaces.

Outboard Wheel Model has 2 1/2" x 1" polyolefin wheels mounted outside the frame for extra stability.

Swivel Caster Model has 3" x 1" polyolefin casters mounted inboard for maximum maneuverability.

Optional Slide-Out Drip Tray prevents messy floors and hazards. Holds 3 quarts of liquid, keeps work areas clean and free from spills. Steel slide-out tray has 1-3/4" lip, includes polyethylene tray with cellulose absorbent.

Shown CW10 with Optional DT413 Drip tray kit

View larger image

Specially designed for smaller drums

• All welded steel frame
• 13 3/4" drain height
• 500 lb capacity

This drum cradle has perfect balance plus exclusive two point fulcrum action. Features four 3" polyolefin wheels. Frame is 22" L x 18" W x 17" H.

View larger image

Eliminates messy and dangerous drips – meets EPA requirements

• For 30 and 55 gallon steel or poly drums
• 17" drain height
• 75 gallon sump capacity
• 800 lb. capacity

Specially designed drum cradle has a retractable tipping lever that easily rocks drum to horizontal position. High density polyethylene spill tub slides under the cradle to provide 120% containment of a 55 gallon drum as required by EPA and Uniform Fire Code regulations. Zinc plated steel cradle frame measures 42" L x 42" W x 17" H. Spill tub is 58" L x 34-1/2" W x 12" H.

View larger image

Don't store your drums for draining without secondary containment!

• Transports and horizontally stores 30 or 55 gallon drums for dispensing
• 100% Polyethylene construction
• 66 gallon sump, meets EPA and SPCC* containment regulations

Poly Drum Cradle Truck has an open containment sump that does not require spilled liquid to flow inside double walls to meet EPA and SPCC requirements. All polyethylene construction means this unit won’t rust or corrode. It’s also easy to clean, eliminating concerns about chemical compatibility of residues. Ergonomically designed, including large 10" x 2 1/2" solid urethane wheels for easy rolling and large loop handles for a secure grip. Includes a nylon strap for added security.

* SPCC - Spill Prevention and Countermeasures

View larger image

These pail racks will save your back!

• Designed to handle steel or plastic pails
• 75 lb. capacity
• Safety lock holds pail securely in place
• Available in carbon or stainless steel

Adjustable safety lock accommodates pails from 10" - 19" tall and up to 12.25" in diameter. Carbon steel unit has a blue enamel finish. T304 Stainless Steel pail tippers have an electro-polished finish that is ideal for use with foods or corrosives. Single Unit dispenses at 10" H. Folds for storage. Overall deminsions: 14" L x 14" W x 30" H.

Shown 15

View larger image

These pail racks will save your back!

• Designed to handle steel or plastic pails
• 75 lb. capacity per pail
• Safety lock holds pail securely in place

Adjustable safety lock accommodates pails from 10" - 19" tall and up to 12.25" in diameter. Carbon steel unit has a blue enamel finish. T304 Stainless Steel pail tippers have an electro-polished finish that is ideal for use with foods or corrosives. Dual Unit has a bottom pail dispensing height of 11 3/4" and a top pail dispensing height of 36 3/8". Overall dimensions: 14" L x 14" W x 55" H.  Available in stainless steel by custom order only.

View larger image

Extra strong polyethylene cradles hold a steel or poly drum up to 55 gallons, 800 lb. capacity. Built-in drip tray returns liquid to the inside of the cradle. Drain plug permits easy liquid recovery. Portable Cradle has retractable handles and curved front for easy, one-man drum handling. 4" diameter polyolefin wheels roll easily. Sump capacity 30 gallons. Stationary Cradle has 41 gallon sump capacity. Specify color: Red (R), Yellow (Y), Blue (BL), Green (G), White (W), Black (BK), Orange (OR), or Gray (GY).

Shown PC6900

View larger image

Transport and drain 55 gallon plastic and fiber drums with ease. Easy-to-use safety belt system secures the drum to the truck. When "breaking over" filled plastic drums, chance of puncture is minimized thanks to specially engineered longer toe pads that support the weight more evenly without creating stress points. Double welded steel frame for long life in an industrial environment. Kickstand is included for upright storage. Also, works with 55 gallon steel drums, but not for use with overpack drums. Polyolefin Wheels are 10" dia. x 2 1/4" W (front) and 6" Dia. x 2" (rear) with a plain bore. Moldon Rubber and Steel Wheels are 10" Dia. x 2 1/2" W (front) and 6" Dia. x 2" (rear) equipped with roller bearings and grease fittings. Overall dimensions: 62" H x 25" W.

Shown 45VR-KS-B

View larger image

• Use with any 55 gallon steel drum
• Drains into pails 14-1/2” high or less
• 1,000 lb. capacity

Drains into a standard 5 gallon steel or plastic pail.  Steel roller wheels allow for easy rotation of drum to draining position. Special chime hook fits under spigot and does not interfere with dispensing operation.  Double welded steel frame for long life in an industrial environment. Kickstand is included for upright storage. Polyolefin Wheels are 10” Dia. x 2-1/4” W (front) and 6” Dia. x 2” (rear) with a plain bore. Moldon Rubber and Steel Wheels are 10” Dia. x 2-1/2” W (front) and 6” Dia. x 2” (rear) equipped with roller bearings and grease fittings. Overall dimensions: 62” H x 25” W (16-1/2” W at nose).