Drum dolly transports two 30 or 55 gallon drums at a time
1800 lb. capacity
Doubles worker productivity. Drums are contained securely within the 2 1/2" deep ring. Drum is 5 1/4" off floor. Heavy duty steel frame with four 3" wide cross strips and 2 1/2" angle stiffener supports the load and reduces flexing. Six double-race ball bearing casters with 4" diameter polyolefin wheels provide total drum dolly maneuverability.
Sometimes you need a drum moved without tilting it - here's how.
Easily load and transport 30-55 gallon drums or pails
Detachable handle with built-in bung wrench and seal remover
800 lb. capacity
Easily load and transport 30-55 gallon drums or pails. 3" x 1.25" polyurethane swivel casters. Overall dimensions 29" W x 22" L. Handle 37" H. Welded steel construction.
Accepts 3 1/2 to 7 gallon pails with bottom O.D. up to 10 1/2"
Features a wider foot print than conventional dollies
Two side compartments for supplies
HDPE construction
175 lbs. capacity
The Pail Pal Single Bucket Dolly's unique design features a wider foot print than conventional dollies, helping to increase stability, and two side compartments for smaller items. Travels on four 3" commercial grade polyurethane swivel casters; one with brake.
Models for 30, 55, 85 gal drums and 95 gallon overpacks
There's no sense paying more for convenient drum mobility! Reliable dollies are heavy-duty welded carbon steel for maximum strength. 3" diameter casters are welded inside the frame for protection and extended service life. Choice of smooth-bore polyolefin or ball bearing steel casters for 360 degrees maneuverability on almost any surface. High visibility orange finish.
Accepts 3 1/2 to 7 gallon pails with bottom O.D. up to 10 1/2"
Features a wider foot print than conventional dollies
Two side compartments for supplies
HDPE construction
250 lbs. capacity
The Pail Pal® Double Bucket Dolly’s unique design features a wider foot print than conventional dollies, providing more stability, and two side compartments for smaller items. Travels on six 3” commercial grade polyurethaneswivel casters; one with brake.
Durable and corrosion resistant, these dollies have a unique design that positions the casters beyond the outer diameter of the drum offering maximum stability. Equipped with four zinc plated bolted on 3" swivel casters with composition wheels and roller bearings. Dollies are available in T-316 stainless steel and carbon steel. Custom sizes available.
Go ahead, beat this one up – it just comes back for more
Rugged seamless structural high density polyethylene
Catches drips
Five casters for extra stability on rough surfaces
500 lb. capacity
This corrosion-proof drum dolly will transport any drum, steel, fiber or plastic up to 55 gallons. There are no seams, welds, or dangerous edges. Your drums receive the no-tilt support of five replaceable 3" hard rubber casters attached to the high-lip, drip catching, enclosed bottom. Measures 24 3/8" outside diameter, 23 1/2" inside diameter, 7 1/8" height.
Polyethylene drum dolly has five 3" polyolefin swivel casters for easy maneuvering. Closed pan design catches drips. Unit measures 29 1/4" inside diameter and 6 1/2" in height, including the casters.
The highest-capacity steel drum dolly on the market. Ultra heavy-duty welded steel frame with durable painted finish. Equipped with (4) 4"x2" locking swivel phenolic casters.
Drum dolly transports 55 gallon drums weighing up to 2000 pounds
Rolls on (8) cast iron swivel casters for maximum stability
Steel construction with painted finish
The Octo drum dolly rolls on (8) cast iron swivel casters for maximum stability. Transports 55 gallon drums weighing up to 2000 pounds with steel construction and painted finish.
Attention-getting colors are easy to spot in your plant
Perfect for identifying products or departments
600 lb. capacity
Models for 15 to 55 gallon drums
Available in 6 standard colors
Drum dollies have four 3" swivel casters for easy maneuvering. Pan-style design with 2 1/2" high sidewall catches spills and drips. Standard colors are: Yellow (YL), Red (RD), Blue (BL), Green (GN), Black (BLK), White (WH). Custom colors are available with a 100 piece minimum order. Contact your BASCO Customer Service Representative.
Place your container in the dolly and tighten the adjusting screw for a snug, secure fit. All welded steel with powder coated finish. 55 gallon drum dolly with steel casters is available with steel casters is available through special order. Contact your BASCO customer service representative for details.
Transports kegs, boxes, drums, cans, and even irregular shaped objects
X-design easily adjusts with a single bolt
Drum Dolly with multi-uses: transports kegs, boxes, drums, cans, and even irregular shaped objects. Choice of steel or rubber casters. Standard color is red. Other colors available. Ask your BASCO Customer Service Representative for details.
Don't let your employees carry heavy pails from place to place...let 'em roll! Designed and built for professional use, almost impossible to tip over.
125 lb. capacity
Designed to carry 5 gallon pails
Center 5" hole allows pail to be tilted
High impact ABS construction
This is the best bucket dolly available for professional use. With its low center of gravity, the lowest on the market, it is almost impossible to tip. The exclusive 5" diameter center hole accepts a 5 gallon bucket and can hold it at an angle making it easier to access material. Ideal for working with thinset, grout, and water. Features five soft rubber 2" diameter heavy duty nickel plated casters for easily moving and turning heavy 5-gallon pails. The dolly has a reinforced design, molded from High Impact ABS plastic. Overall dimensions: 16-1/2" diameter x 3" H. Inside opening is 11-1/8" diameter and recessed 2-1/2". Bottom of inside opening to floor has a clearance of 5/8". Weighs 4 lbs.
Don't lift and carry heavy pails from place to place - roll 'em
Fits standrad 5 and 6 gallon plastic or steel tapered pails
100% rust-proof and impact resistant polypropylene or ABS construction
75 lb. capacity
This light weight versatile pail dolly has an 11" inside diameter and five nylon dual wheel swivel stem casters, 1 1/2" diameter x 1 3/8" wide. Choose polypropylene for chemical resistance or ABS (hard plastic) for general use.
Drum dolly designed for use with 55 gallon steel drums
Unique 10° tilting feature for residual liquid extraction
Simply depress the foot operated locking tilt mechanism to tilt the drum by 10". Includes four swivel casters for maximum maneuverability. Steel construction with a zinc plated finish.
Now you can buy one dolly for 4 different size containers
· Highly polished bright zinc finish for corrosion resistance
·Up to 1,200 lb. capacity
Drum dolly handles steel or plastic 5 gallon pails, 30 and 55 gallon drums, even LP gas cylinders. Heavy duty welded steel frame with zinc plated finish. Includes four3” Dia. X 1-1/4” W swivel casters and 48” nylon pull strap with a rubber-coated hanging hook. Some assembly required.
Rust-proof 100% high density polyethylene double drum dolly transports steel, plastic or fiber drums, two at a time. Dolly has six 3" swivel casters for easy maneuvering. Pan-style design catches drips. Unit measures 25" W x 52" L x 6 1/2" H including casters.
Get mobile dispensing AND secondary containment in one dolly!
100% polyethylene - won't rust or dent
Conforms to EPA, SPCC* and NPDES* regulations
450 lb. UDL (Uniformly Distributed Load)
Dispensing from drums that must be moved around the plant is no problem. 11 gallon (41.6 liter) sump meets secondary containment regulations for incidental spills and drips. Sump has a molded-in spout for easy draining and molded-in bung holder for storing a removed bung. Spill Scooter drum dolly rolls on four 3” polyethylene casters and handles all drums up to 55 gallons. Molded-in bright yellow color won't fade or chip. 34" diameter x 8.82" high. Optional T-Handle allows easier maneuvering. 36 5/8" long steel, enamel finish.
* SPCC - Spill Prevention Control and Countermeasures Compliant. NPDES -National Pollutant Discharge Elimination System
Unique dolly brings the heated drum right to the job
Drum dolly heats 55 gallons of water to 140º F in 8 hours
Pulsing heat action - Ideal for heat-sensitive materials
900 lb. load capacity
Unique and versatile heater drum dolly is designed for non-flammable, non-hazardous materials and for indoor use only. Unit has a 15 1/4" square aluminum heating platen for efficient heat transfer. Adjustable infinite control switches on and off to prevent improper heat build-up. These heaters do not have a thermostat and will not automatically reach and hold a given temperature. Dolly rolls on four 3" diameter phenolic swivel casters. 28 1/2" outside diameter x 24" inside diameter x 6" high. Supplied with a 6’ pull chain and 6' power cord with a NEMA plug. Industrial outlet required to match NEMA plug listed in the table.
Versatile unit transports hazardous material drums with ease, then tilts horizontal to become an efficient dispensing station, and contains spills, drips and leaks. Standard five-gallon pail fits into sump for dispensing. Poly-Dolly rolls on 10" diameter polyolefin wheels, designed to easily roll through 36" wide dorrways. Unit can also be forklifted from the rear. Polyester strap holds drums securely, recessed strap mount can't break off. Containment sump has plug for easy draining. Bright yellow color is molded-in; can't fade or chip. 72" long x 34" wide x 27" high. All Terrain Wheel has 10" diameter x 2 1/2" pneumatic tire for rough surfaces.
Drum and Pail Dollies
.jpg)
.jpg)
