Reconditioning Equipment

View larger image

• Use with steel and plastic drums and pails
• Adjustable pail retainer included
• 500 lb. capacity, 10 gauge carbon steel construction
• Options and custom manufacturing available

Base Unit includes a turntable that supports up to 500 lbs. and parts up to 26" diameter and up to 38" high, vertical wash pump that produces 20 GPM @ 50 psi and has a revolving spray head for cleaning the interior of each container, 6 KW Incoloy heating element with a 12-hour timer, adjustable cleaning cycle timer 0-60 minutes, adjustable pail retainer for securing small containers on the table while being flushed out, stainless steel chip screen to filter debris before reaching the sump, 50 gallon main solution tank, and a full access swing out loading door with an interlock switch that will shut off the pump if door is opened while the machine is in use. Base Unit with Options Package includes 1/2" NPT water inlet, water level switches, bag filter, 12" oil skimmer, 7-day skimmer timer, 7-day heat timer, and thermometer. Note: Price does not include installation. An owner's manual and parts list is provided. Electrical requirements for both units: 230 volts, 60 cycles, 3 phase, 40 amps (20 amps if 460 volt available).

Shown 1DW

View larger image

Here's an inexpensive way to do your own testing of drums before re-use. Air-operated system is easy to install and use. Simply insert the test plug into any 2" NPS drum bung and turn on the air supply. A pilot light comes on when drum pressure reaches set point. If leakage is detected, pilot light will turn off. Components include: air control panel, NEMA 7/9 120 volt pilot light, NEMA 1 pressure switch, test plug assembly with two 10' hose assemblies and 25' of air tubing with fittings for connecting pressure switch to control panel. Air requirement: 5 scfm @ 80 psi. Power supply: 120 volt AC/60 Hz. Units are factory pre-set according to your requirements and are non-adjustable. Please specify pressure set point 2 – 7 psi when ordering. For additional 2" NPS test plugs, order item 2083.

Related Items:

Wrenches

Personal Protection

View larger image

Just insert test plug into bung opening and pull cam handle down. Replaceable soft neoprene seal is expanded against the bung threads, effectively seals up to 100 psi. Aluminum body with plated steel cam handle.

Shown 2083

View larger image

• Exceptional resistance to tangling and balling
• Flexible and easy to remove after cleaning

This patented cross-link steel cleaning chain is made of square links with four sharp points per link to clean deep into rusty chimes and break loose even the most stubborn residues. Heat-treated and case-hardened for longer life. Standard package contains twenty 2 1/2' lengths of chain.

Minimum order: 50 ft.

View larger image

Restore your drums to reusability

Damaged or dented chimes can stop a drum deheader dead in its tracks. Just place De-Kinker on the damaged chime of a tight head steel drum and pull handles together. 20" long handles offer tremendous mechanical leverage to restore chime curvature and tightness. Use on 30 and 55 gallon drums, either standing up or on their side. Super-durable cast iron construction.

View larger image

• Only 1.2" diameter
• Use with drums or tanks up to 40" diameter

View larger image

Use this no-mess stick when your mark has to last

• All-Purpose solid paint marker
• Marks on any surface or material
• Weather-resistant, fade-resistant

Real lead-free paint in stick form, combines long-lasting durability of paint with ease-of-use of a crayon. Marks on smooth, rough, rusty or dirty surfaces and also marks through oil and water. Marking range: -50° F to 150° F. Select from our stock colors white or yellow. 11/16" diameter x 4-3/4" long. Available in 3/8" and 1" diameters and in a variety of colors through special order.

Shown M84810

View larger image

The BEST Permanent Marker for wet or oily surface

• Marking temperature range -50 F - 150 F
• Permanent paint, dries quickly, long wearing, fade resistant
• 3 mm medium point bullet tip nib

PRO-LINE HP® markers offer unsurpassed writing capability on oily, soapy, and wet surfaces. Low in halogenated compounds and sulfur for use in corrosive sensitive applications. PRO-LINE HP® markers are the safest and most versatile paint marker on the market. They are xylene-free and contain no California Proposition 65, EPA HAPS, or SARA 313 listed chemicals. Other colors are available upon request, requiring a minimum order of one dozen.

Shown M96960

View larger image

Real paint that stays put until you wash it away!

• Water or detergent removable paint
• Marks on non-porous surfaces
• Ideal for quality control processes, parts assembly, etc

Marks on metal, glass, plastic, and other non-porous surfaces.

Water removable paint markers mark with real paint that is removable with water or in a power wash process.

Detergent removable paint markers mark with water and weather resistant paint that can be removed with detergents that have a pH level of 10 or higher.

Standard colors are white and yellow. A variety of other colors are available through special order.

Shown M97031

View larger image