Drum Security, Capseals, Drum Seals, & Plugs

View larger image

Know when your product has been tampered with!

• Tamper evident
• No tools required
• Easy to apply
• Other colors and printing available at additional cost

This seal is tamper evident when applied to any metal, plastic or fiber drum, pail or container. When the seal is broken it reveals the word "OPENED" on the tape and the container where the tape was applied. The tape comes in standard colors red or blue and the size is 2" x 6", 1 mil polyester.

View larger image

Try as you might, you'll never successfully tamper with this seal!

• Secure drum bolt rings, cargo containers, cabinets, totes, etc.
• Seal strap fits through 1/4" minimum size opening
• UV-Resistant HDPE withstands extreme weather
• To secure drum bolt rings use 12" seal only

          High Security Pull-Tight Seals have a unique design that provides unparalleled tamper-evident security. Simply insert the strap-end into the locking barrel and pull it tight to seal, leaving the strap-end attached. Manufactured of tough UV-stable high-density polyethylene, virtually impervious to weather extremes. Temperature limit: 230º F. Withstands a 35-40 lb. pull. Hot stamped with a seven digit serialized number and the word SEALED.

Custom Seals are available through special order with seven digit serialized numbering and an additional 2 lines of copy (up to13 letters/spaces per line). Call Customer Service at 1-800-776-3786 for details.

Colors: Red requires a minimum order qty of 50 seals per bag.
Blue, Green, Orange, and Yellow seals availabe with minimum order of 1,000

View larger image

• One-hand installation
• 100% polypropylene

Withstands rough handling but breaks when tampered with. Fully enclosed locking barrel prevents tampering. Seal fits through slot size as small as 3/32".

Custom decoration and sequential numbering are available. Call customer service at 1.800-776.3786.

Note: This is a special order seal requiring a 10,000 piece, one case, minimum order.

View larger image

Easy-to-use one-piece seal is 100% Delrin®, won't rust or corrode. Strong shank fits through 1/8" diameter hole, collar and fully enclosed body prevent tampering. Custom decoration, sequential numbering and other colors available. Call Customer Service at 1.800.776.3786 for details.

View larger image

• Ideal for attaching tags to drums or securing bags
• Copper coated 18 gauge wire ties

Wire Ties are easy-to-handle and economical. Made from high quality annealed steel wire for uniform ductility, each tie has a 1/2" loop at each end to allow high speed sealing with a twist tool. Packed in convenient rolls of 5000.

Note: Wire ties require a 5,000 piece (1 roll) minimum order.

Special length wire ties may be custom ordered. Call Customer Service at 1.800.776.3786 for details.

View larger image

Specially designed twisting tools are designed for high production. Hardened steel tip and comfortable grip.

Manual Twisting Tool operates easily with a few turns of the wood grip.

Semi-Automatic Twisting Tool has a spring-return ratchet that makes 2 1/2 twists with one short pull of the handle.

Wire Ties

View larger image

Simple and economical seal is easy to use. Just place the metal seal over the spiral-wound wire and squeeze with fingers until the seal click-locks shut. Standard white color. Order sealing wires separately below.

Custom decoration, sequential numbering, and special colors are also available. Longer length sealing wires are also available. Call customer service at 1.800.776.3786 for details.

Note: Standard package size is 1,000 units.

Shown with SEL1 with 14SP6

View larger image

Plain lead seals have 4-ply 30 gauge galvanized seal wire. Seal must be destroyed to be removed.

Seal Press Tool assures tight, non-slip lead sealing. 5" long handles for leverage, convenient spring return. Crimps 5/16" and 1/2" seals. Imprints on 1/2" seals only. Supplied with two 1/2" dies with up to four letters inscribed into dies at no extra charge. Different length seal wires available.

Numbered seals available through special order in minimum quantity of 1000.
Call Customer Service at 1-800-776-3786 for details.

Note: Standard package size is 1,000 units.

View larger image

360-0891D drilled screw cap provides an inexpensive means of protecting the contents of your plastic Hedpak® or closed-head plastic pail when combined with seal SEL-5MIXED. A small hole is drilled though each fin on the 70 mm screw cap to accept the seal. SEL-5MIXED seal (sold separately below) can be threaded through one of the holes of the tightened cap closest to the center of the container, wrapped around the container handle and sealed. The seal must be broken to access the container. SEL-5MIXED colors will vary unless a one color order is placed for 100,000 seals. Price breaks begin at full carton quantities of SEL-5MIXED (5,000 pcs.) and 360-0891D (250 pcs.). Call Customer Service at 1-800-776-3786 for details.

View larger image

Perfect for attaching shipping tags or sealing drum rings

• Fits through openings as small as 3 mm diameter
• Chemical and weather resistant polypropylene
• 5" long, 4 1/2" usable length
• 18 lb. break strength

Tamper evidence at a bargain if you don't mind what color you will receive. An order for 100,000 pieces will guarantee you receive the color of your choice. Thread the end through the seal's locking chamber and pull to form a tamper evident seal. The seal must be broken to remove. Made of 100% polypropylene. Order in larger quantities and save!

View larger image

View larger image

Your product is valuable to you--protect it! Keep your product in and the bad guys out.

• Provides security on location or while in transport
• Prevents access to drum plugs
• Diecast zinc construction
• Requires Master Lock® No. 3 padlock (sold separately)

Simple, Safe, and Secure. Easy to install drum plug locking devices prevent access to material contained in your drums. Simply slide the two halves of the locking device around the bung flange, slip the joining bar through the halves and insert a No. 3 Master Lock® padlock through the end hole of the bar. The locking devices are sold in sets for plastic drums (fits both Greif and Mauser plastic drums with raised bung flanges) or steel drums with steel round-head plugs. PL2020 includes two 2" devices. PL2075 includes one 2" and one 3/4" device.

Note: Padlocks are sold separately and required for each locking device.

View larger image

• Ideal for plastic drums, totes, and general use
• Made of high density polypropylene co-polymer
• 50 lb. breaking strength
• 8" strap length

View larger image

View larger image

The low cost solution to tamper prevention!

• 5 1/2" overall with a usable length of 4 3/8"
• Ideal for use with leverlock drum rings
• Fits through holes as small as 3/16"
• 6 digit sequentially serialized

     With a 55 lb. break strength and temperature limits of -60° F to 320° F, these patented seals offer unique tamper evidence for shipping drums with leverlock rings, totes with fittings for seals or any other applicable container. Made entirely of an acetal material the seal features a pull tab that breaks the seal and allows quick access to the container's contents. If the seal is broken before the container arrives to its destination it indicates that tampering may have accurred. Packaged 100 seals per bag and 1,000 seal (10 bags) per carton.

Sold in bags of 100 only

View larger image

Drumlok® secures the contents of drums and prevents pilferage and contamination of product.

Tight-Head Drumlok® fits 30 or 55 gallon tight-head drums with 2" NPS and 3/4" NPS openings. Replaces drum plugs with iridited aluminum locking plugs and 5/8" diameter x 22" long locking bar. Includes Buna-N and polyethylene plug gaskets.

Open-Head Drumlok® replaces the 5/8" bolt on the drum locking ring. Shackle of padlock fits into hole in Drumlok® and prevents removal or loosening of the device. Heavy-duty steel with rust-resistant yellow zinc plated finish.

Padlocks sold separately.

View larger image

Keep your product safe and secure

• No tools required for capseal
• Easy to install and remove
• Capseal must be broken to remove

This Push-Lock™ Capseal securely locks directly into the (Plastiplug™) buttress or the NPS plugs listed below. Most Greif containers come with these plugs installed. Please check to make sure your drums have these plugs because the Capseal ONLY works with the Plastiplug™ brand. Inquire with our customer service rep about the plastiplug™ closures.

View larger image

Make drum security simple and cost effective with Plug-N-Lok. Protect expensive drum contents by removing the 2" and 3/4" plugs and installing Plug-N-Lok plugs. An expandable heavy-duty Geolast gasket expands as the high torque Zyteland® wing nut is turned clockwise to form a liquid and airtight seal. Once the plug is securely tightened, a padlock must be installed to lock the wing nut in place.

Designed for use with a No. 1 or No. 3 Master Lock® (not included).

Note: Plug-N-Lok security plugs are not to be used for shipping filled drums.

View larger image

Make your drums stand out

BASCO now offers customized, full color decorated capseals. Create a design for each of your products or customize the seal for your customer. Use your company logo or even your own photograph. Decorate white steel or plastic capseals. No large minimum order and no long lead time. Serial numbering can also be included in your design at no extra charge. Large quantity pricing available. Call Customer Service at 1-800-776-3786 for details. $100 set-up charge per size. No charge if digital image is supplied. The art work will be applied with an adhesive label.

View larger image

• No costly crimping tools required
• Quick and easy "snap on" installation
• No metal parts to rust or corrode
• 100% polyethylene for increased chemical compatibility
• Pad printing available with minimum order and set-up charge

View larger image

• Designed to fit round-head style plugs in steel drums
• Must be destroyed to remove
• Snaps on by hand
• No tools required

View larger image

Easy to use polyethylene capseals snap on by hand for tamper-evident sealing of plastic drums. These capseals are not designed as a secondary seal, only to provide tamper-evident sealing. Must be destroyed to remove. White only.

Shown GCS200

View larger image

Self-gasketing capseals crimp over drum plugs. Once crimped in place, they indicate unauthorized entry into the drum because the capseal must be destroyed to be removed. Requires sealing tool, order separately. Choice of plain white color or attention-getting "Sealed For Your Protection" decoration in poly or "This Package Is Sealed To Protect You" decoration in steel. Choice of steel or polyethylene.

Custom decoration and pad printing is available with minimum and set up charge.

Special discounts are available for larger quantities.

Shown CCR250 Capsealing Tool

View larger image

Durable capseals crimp over drum plugs and provide security for your finished product or stored raw materials. Once crimped in place, they must be destroyed to be removed. Requires sealing tool, order separately. Choice of plain white color or attention-getting "Sealed-Protected" decoration. Choice of steel, polyethylene, or aluminum.

View larger image

View larger image

Prevent unauthorized access the good old fashioned way

• Popular sizes for use with drum security devices
• Available keyed differently or keyed alike
• Laminated steel body for superior strength
• Proprietary rustproofing for longer life

ML1 and ML1-KA feature 1 3/4" (44mm) wide laminated steel body for superior strength, hardened steel shackle for extra cut resistance that measures 5/16" diameter x 3/4" W x 15/16" H, 4-pin cylinder to prevent picking and dual locking levers for extra pry resistance. Includes 2 keys per lock.

ML3 and ML3-KA feature a 9/16" (40mm) wide laminated steel body for superior strength, hardened steel shackle for extra cut resistance that measures 9/32" diameter x 5/8" W x 3/4" H, 4-pin cylinder to prevent picking and dual locking levers for extra pry resistance. Includes 2 keys per lock.

View larger image

• Choice of crimp on steel or snap-on plastic
• Crimp on style requires use of a capsealing tool
• Plastic seal requires no tools